Features
- 80A discharge current load test designs for 6V/12V lead acid and li-ion battery from 40Ah to 200Ah best for storage battery, UPS battery, solar battery and wind power battery
- Built-in 10 seconds timer in load test to avoid defective
- Temperature cnntrol in load test
- Reverse polarity protection
- Color LED directly tells battery SOH
- Auto data hold
Specification：
- 1. The instrument is applicable to common 6V and 12V lead-acid accumulators.
- 2. Load test current: about 80A.
- 3. Accumulator capacity detection range: 40Ah ~ 200Ah.
- 4. Maximum voltage: DC 19.99V.
- 5. Internal resistance range of battery: 1.00milliohm ~ 99.99 milliohm.
- 6. LED status indication:Battery condition: “Green” (Sufficient Capacity), “Yellow”(Insufficient Capacity), “Red” (Replace Battery);Charging system: “Green” (Normal Charging), “Yellow” (Abnormal Charging).
- 7. Accumulator capacity presetting: continuously adjustable in the range of 40-200Ah, with 5Ah increment.
- 8. Test time: less than 10s; test time interval: it is suggested as about 5min.
- 9. Poor contact prompt for test clamp; reverse clamp connection protection; input over voltage protection.
- 10. Using condition: -10℃~ 55℃ , relative humidity: lower than 80%.
- 11. Product dimension: about 11.5*7.0*20.5cm; dead weight: about 900g.
- NOTE: it can not test starting battery(CCA)
Packing list:
- 1x Battery tester
- 1x Manual (in English)