Features：
- 80A discharge current load test designs for 6V/12V lead acid and li-ion battery from 40Ah to 200Ah best for storage battery, UPS battery, solar battery and wind power battery
- Automotive electrical system test includes engine cranking test, maximum load test, charging system test designed for cranking battery of cars and heavy duty vehicles
- Built-in 10 seconds timer in load test to avoid defective
- Temperature control in load test
- Reverse polarity protection
- Color LED directly tells conclusion of battery SOH (good/weak/bad)
- Auto data hold
Specifications：
- Test traction lead-acid battery
- 1 ) Used on ordinary 6V, 12V traction lead-acid battery.
- 2 ) Load test current: ＜ 80A.
- 3 ) Battery capacity test range: 40Ah-200Ah.
- 4 ) Maximum voltage value: DC19.99V.
- 5 ) Internal resistance of battery: 1.00 milliohm – 99.99 milliohm.
- 6 ) L E D Status indication :Battery status: " GREEN "(battery sufficient) ," YELLOW "(battery low) ,"RED "(replace battery);
- 7 ) Battery capacity preset: 40 - 200 A h continuing adjust, 5 A h increment.
- 8 ) Test time: less than 10s; test interval : about every 5 minutes.
- Test start-up lead-acid battery
- 1 ) Used on 12V start-up lead-acid battery.
- 2 ) Maximum voltage value: DC19.99V.
- 3 ) Internal resistance of battery: 1.00 milliohm – 99.99 milliohm.
- 4 ) Optional battery standards:
- CCA:100 ~ 1700
- IEC:100 ~ 1000
- EN:100 ~ 1700
- DIN:100 ~ 1000
- JIS: Need to look-up table and contrast CCA (Table is in manual )
Packing list:
- 1x 3 in 1 Battery Tester
- 1x User Manual (in English)